- UNS: S21800
- WNR: 1.3964
- Specification: MS 5848, ASTM A194, ASTM A276, ASTM A479, ASME SB479, ASTM A193
- International Specification: HPA 50, Alloy 218, N60 Stainless, NAS60
| Outer Size (mm) | Wall Thickness (mm) |
|---|---|
| 10 × 10 | 1.0 – 2.0 |
| 12 × 12 | 1.0 – 2.0 |
| 15 × 15 | 1.5 – 3.0 |
| 20 × 20 | 1.5 – 3.0 |
| 25 × 25 | 2.0 – 4.0 |
| 30 × 30 | 2.0 – 5.0 |
| 40 × 40 | 2.5 – 6.0 |
| 50 × 50 | 3.0 – 6.0 |
| 60 × 60 | 3.0 – 8.0 |
| 75 × 75 | 3.0 – 8.0 |
| 100 × 100 | 4.0 – 10.0 |
Nitronic 60 Bright Square Bar
Nitronic® 60 Square Rod
ASTM A193 UNS S21800 Box Bar
Nitronic Alloy 60 Square Bar Sizes
NITRONIC® 60 Square Rod Sizes
AMS 5848 Solid Square Bar Physical Properties
AWS 166 Rectangular Square Bar Testing
ASTM A193 UNS S21800 Box Bar Finish
Alloy 218 Square Steel Rod Origin
Nitronic® 60 Square Rod Documentation
ASTM A193 UNS S21800 Box Bar Shape
Nitronic 60 Bright Square Bar Packaging
N-60 Stainless Threaded Square Rod Supply Condition
HPA 50 Cold Rolled Square Bar Tolerances
ASTM A193 UNS S21800 Box Bar Marking
HPA 50 Cold Rolled Square Bar Services
Nitronic® 60 Square Rod Method
| Cycle | Alloy | Weight Change mg/cm² at number of cycles indicated | |||||
|---|---|---|---|---|---|---|---|
| 134 cycles | 275 cycles | 467 cycles | 200 cycles | 304 cycles | 400 cycles | ||
|
871 - 927 °C (1600 - 1700 °F) 25 minutes heat 5 minutes cool duplicate tests |
NITRONIC 60 | 0.23 | -10.7 | -26.0 | - | - | - |
| Weight Loss, mg/cm² | |||||||
|
1038 °C (1900 °F) 30 minutes heat 30 minutes cool |
NITRONIC 60 | - | - | - | 43.0 | 60.4 | 74.8 |
| % Yield Strength | Applied Stress MPa (ksi) | Location | Time to Failure Hours |
|---|---|---|---|
| 100 | 669 (97) |
|
|
| 75 | 503 (73) |
|
|
| 60 | 400 (58) |
|
|
| 50 | 338 (49) |
|
|
| CG | Centreless ground | HF | Hot finished |
|---|---|---|---|
| P&T | Peeled and turned | RT | Rough turned/peeled |
| BD | Bright drawn | SRE | Slit rolled edge |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| ST | Smooth turned | PR | Peeled and reeled |
| CD | Cold drawn | P | Polished |
Innovative Nitronic 60 Square Bar Manufacturer in India providing advanced products built for extreme conditions.
| Machining Type | Suggested starting rates are |
|---|---|
| Drilling |
|
| Side and Slot Milling |
|
| Single Point turning |
|
| Reaming | Feed - same as drilling - 100 SFM |
| Machining Operation | Cutting Rates, SFM | Cutting Rates, Depth/Rev Feed |
|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
Renowned Nitronic 60 Square Bar Supplier in India of top-grade materials, crafted for longevity and reliability.
| Bar Location | Field Strength Ampere/Metres (Oersteds) | |||
|---|---|---|---|---|
| 7958 (100) | 15 916 (200) | 39 790 (500) | 79 580 (1,000) | |
| Surface | 1.0009 | 1.0040 | 1.0029 | 1.0029 |
| Central | 1.0013 | 1.0024 | 1.0033 | 1.0031 |
| Intermediate | 1.0003 | 1.0022 | 1.0039 | 1.0029 |
| Alloy | Dynamic Coefficient of Friction | |||||
|---|---|---|---|---|---|---|
| 0.8 | 5.6 | 14.0 | 28.0 | 56.0 | 112.0 | |
| NITRONIC 60 | 0.50 | 0.35 | 0.38 | 0.44 | 0.44 | 0.44 |
| Temperature °C (°F) | µm/m/°C (in./in./°F) |
|---|---|
| 24 – 93 (75 – 200) | 15.8 (8.8 × 10⁻⁶) |
| 24 – 204 (75 – 400) | 16.6 (9.2 × 10⁻⁶) |
| 24 – 316 (75 – 600) | 17.3 (9.6 × 10⁻⁶) |
| 24 – 427 (75 – 800) | 17.6 (9.8 × 10⁻⁶) |
| 24 – 538 (75 – 1000) | 18.0 (10.0 × 10⁻⁶) |
| 24 – 649 (75 – 1200) | 18.5 (10.3 × 10⁻⁶) |
| 24 – 760 (75 – 1400) | 18.9 (10.5 × 10⁻⁶) |
| 24 – 871 (75 – 1600) | 19.3 (10.7 × 10⁻⁶) |
| 24 – 982 (75 – 1800) | 19.8 (11.0 × 10⁻⁶) |
Global Nitronic 60 Square Bar Supplier in India delivering cutting-edge solutions with enhanced protective properties.
| Condition | Diameter, mm (in.) | Test Temperature, °C (°F) | Charpy V Notch Impact J (ft-lbs) |
|---|---|---|---|
| Annealed | 54.2 (2.25) | Room Temperature | 325 (240)* |
| 54.2 (2.25) | -73 (-100) | 325 (240)* | |
| 54.2 (2.25) | -196 (-320) | 217 (160) | |
| Annealed | 25.4 (1) | Room Temperature | 325 (240)* |
| 25.4 (1) | -73 (-100) | 310 (229) | |
| 25.4 (1) | -196 (-320) | 195 (144) | |
| Cold Swaged 18% Hardness RC29 | 23.7 (0.932) | -196 (-320) | 91 (67) |
| Cold Swaged 40% Hardness RC37 | 20.2 (0.795) | -196 (-320) | 54 (40) |
| Cold Swaged 54% Hardness RC42 | 17.8 (0.700) | -196 (-320) | 35 (26) |
| Cold Swaged 18% Hardness RC29 | 23.7 (0.932) | -129 (-200) | 122 (90) |
| Cold Swaged 40% Hardness RC37 | 20.2 (0.795) | -129 (-200) | 60 (44) |
| Cold Swaged 54% Hardness RC42 | 17.8 (0.700) | -129 (-200) | 41 (30) |
| Temperature, °C (°F) | Number of Heats | Stress Rupture Strength, MPa (ksi) | ||
|---|---|---|---|---|
| 100 hr life | 1000 hr life | 10000 hr life | ||
| 538 (1000) | 3 | 496 (72) | 359 (52) | 241 (35) |
| 593 (1100) | 3 | 338 (49) | 214 (31) | 138 (20) |
| 649 (1200) | 4 | 200 (29) | 117 (17) | 69 (10)* |
| 732 (1350) | 1 | 97 (14) | 55 (8) | - |
| 816 (1500) | 1 | 46 (6.7) | 28 (4) | - |
Dependable Nitronic 60 Square Bar Supplier in India with a focus on performance, safety, and innovation.
| Condition | Diameter, mm (in.) | 0.2% YS, MPa (ksi) |
|---|---|---|
| Cold Drawn 39% | 11.2 (0.440) | 834 (121.0) |
| Annealed | 12.7 (0.500) | 466 (67.6) |
| Condition | Diameter, mm (in.) | Fatigue Limit, MPa (ksi) 10⁸ Cycles | Hardness |
|---|---|---|---|
| Annealed | 25.4 (1) | 258 (37.5) | 95 HRB |
| Cold Worked 54.6% | 17.8 (0.70) | 500 (72.5) | 44 HRC |
| Test Temperature, °C (°F) | Condition | Weight Loss, mg/cm² |
|---|---|---|
| NITRONIC 60 | ||
| 1149 (2100) | Before Descaling | 16.5 |
| After Descaling | 23.2 | |
| 1204 (2200) | Before Descaling | 26.1 |
| After Descaling | 35.4 |
| % Cold Drawn | Shear Strength, MPa (ksi) |
|---|---|
| 10 | 614 (89) |
| 20 | 676 (98) |
| 30 | 731 (106) |
| 40 | 779 (113) |
| 50 | 841 (122) |
| 60 | 896 (130) |
A top-tier Nitronic 60 Square Bar Stockist in India committed to quality assurance and long-term product value.
| Condition | Diameter, mm (in.) | Torsional Modulus G, GPa (Mpsi) | Hardness HRB | 0.2% Torsional YS, MPa (ksi) | Modulus of Rupture, MPa (ksi) | |
|---|---|---|---|---|---|---|
| γ | ε | |||||
| Annealed | 25.4 (1) | 61 (8.83) | 95 | 337 (48.9) | 350 (50.7) | 855 (124) |
| Annealed | 9.5 (0.375) | - | 95 | - | - | - |
| Condition | Bearing Yield Strength, MPa (ksi) | Bearing Strength, MPa (ksi) | 0.2% YS, MPa (ksi) | UTS, MPa (ksi) | Hardness, (R) | Elongation % in 4D0 |
|---|---|---|---|---|---|---|
| Annealed | 548 (79.5) | 1313 (190.5) | 360 (52.2) | 723 (104.9) | B90 | 49 |
| 10% Cold Rolled | 916 (132.8) | 1462 (212) | 625 (90.6) | 849 (123.1) | C26 | 40 |
| Property | Value | Units |
|---|---|---|
| Ultimate Tensile Strength (UTS) | 830 – 965 | MPa (120 – 140 ksi) |
| Yield Strength (0.2% Offset) | 415 – 585 | MPa (60 – 85 ksi) |
| Elongation in 4D0 | 40 | % |
| Reduction of Area | 45 | % |
| Hardness | 179 – 217 | HB |
| Alloy | 0.2% YS, MPa (ksi) | UTS, MPa (ksi) | Reduction of Area | Elongation % in 4D0 | Bend 1.5T | |
|---|---|---|---|---|---|---|
| NITRONIC 60 | Unexposed | 341 (49.5) | 800 (116.0) | 66 | 74 | 180° |
| Exposed | 400 (58.0) | 630 (91.5) | 22 | 19 | 100° | |
Certified Nitronic 60 Square Bar Stockist in India of high-integrity products with proven resistance to fatigue.
| Property | At | Value | Unit |
|---|---|---|---|
| Density | 24°C | 7,622 | Kg/m3 |
| Electrical Conductivity | 24°C | 1.7% | IACS |
| Electrical Resistivity | 24°C | 0.982 | Microhm.m |
| Poisson's Ratio | 0.298 | - | |
| Modulus of Elasticity (tension) | 24°C | 180 | GPa |
| Modulus of Elasticity (torsion) | 24°C | 57 | GPa |
| Relative Magnetic Permeability | - | 1.003 | - |
| Cofficient of Expansion | 24-93°C | 15.8 | x10-6 / °C |
| 24-316°C | 17.3 | x10-6 / °C | |
| 24-538°C | 18.0 | x10-6 / °C |
A Nitronic 60 Square Bar Stockist in India of excellence—delivering consistent quality across every shipment.
| Test Temperature, °C (°F) | Weight Loss, mg/cm² (mg/in²) |
|---|---|
| NITRONIC 60 | |
| 870 (1600) | 0.217 (1.40) |
| 930 (1700) | 0.332 (2.14) |
| 980 (1800) | 471.201 (3040) |
| Category | Countries | Delivery Time | |
|---|---|---|---|
| Fast Delivery (Under 10 Days) | Oman | 9 Days | |
| Bahrain | 8 Days | ||
| Medium Delivery (25–30 Days) | Netherland | 30 Days | |
| Spain | 30 Days | ||
| Long Delivery (40+ Days) | Algeria | 45 Days | |
There is no fixed MOQ for Nitronic 60 Stainless Steel Hollow Square Bar; we supply any quantity.
Yes, we supply Alloy 218 Square Steel Rod in custom sizes, thickness and length as required.
HPA 50 Cold Rolled Square Bar is manufactured per ASTM A193 and supplied with MTC on request.
AMS 5848 Solid Square Bar ships ex-stock quickly; custom orders dispatch within two to five weeks.
N-60 Stainless Threaded Square Rod is available in 4mm up to 100mm, with custom cutting on request.