Titanium Grade 1 Tube Standards
- UNS: R50250
- WNR: 3.7025
- Specification: ASTM B338 / ASME SB338
- info@aesteironsteelpipes.com
- +(91)-22- 6777 6777
| Gauge | Typical Value (inch) | Thickness Range (inch) |
|---|---|---|
| 9 | 0.148 | 0.140 - 0.150 |
| 8 | 0.165 | 0.157 - 0.167 |
| 11 | 0.12 | 0.112 - 0.122 |
| 10 | 0.134 | 0.126 - 0.136 |
| 13 | 0.095 | 0.087 - 0.097 |
| 12 | 0.109 | 0.101 - 0.111 |
| 7 | 0.18 | 0.175 - 0.185 |
| 15 | 0.072 | 0.066 - 0.074 |
| 14 | 0.083 | 0.075 - 0.085 |
| 17 | 0.058 | 0.053 - 0.058 |
| 16 | 0.065 | 0.060 - 0.065 |
| 19 | 0.042 | 0.038 - 0.042 |
| 18 | 0.049 | 0.044 - 0.049 |
| 22 | 0.028 | 0.025 - 0.029 |
| 20 | 0.035 | 0.031 - 0.035 |
Titanium Grade 1 Tube
ASTM B338 UNS R50250 Seamless Tube
Alloy Grade 1 Welded Tube
CP Titanium Gr 1 Seamless Tube Size
Grade 1 Titanium Alloy Welded Tube Size
Alloy Grade 1 Capillary Tube Sizes
WNR 3.7025 Coil Tube Sizes
Titanium Grade 1 Tube Form
Titanium Cp Grade 1 ERW Tube Physical Properties
ASTM B338 UNS R50250 Tube Shape
Commercially Pure Ti Gr 1 Tube End
Grade 1 Titanium Alloy Round Tube Marking
Titanium Cp Grade 1 Rectangular Tube Method
WNR 3.7025 Square Tube Origin
Alloy Grade 1 Condenser Tubes Services
CP Titanium Gr 1 Boiler Tube Process
ASTM B338 UNS R50250 Seamless Tube Finish
Titanium Grade 1 Tube supplier in india Offering products built for extreme coditions
| OD (mm) | WT (mm) | kg/m | inch | SCH |
|---|---|---|---|---|
| 13.72 | 01.65 | 0.050 | 1/4 | 10S |
| 17.15 | 3.20 | 01.12 | 3/8 | 80S |
| 26.67 | 2.11 | 01.30 | 3/4 | 10S |
| 13.72 | 3.02 | 0.081 | 1/4 | 80S |
| 26.67 | 3.91 | 2.23 | 3/4 | 80S |
| 17.15 | 2.31 | 0.086 | 3/8 | 40S |
| 201.34 | 3.73 | 01.65 | 1/2 | 80S |
| 201.34 | 2.77 | 01.29 | 1/2 | 40S |
| 17.15 | 01.65 | 0.064 | 3/8 | 10S |
| 26.67 | 2.87 | 01.71 | 3/4 | 40S |
| 33.40 | 2.77 | 2.13 | 1 | 10S |
| 33.40 | 4.55 | 3.29 | 1 | 80S |
| 13.72 | 2.24 | 0.064 | 1/4 | 40S |
| 42.16 | 3.56 | 3.44 | 1¼ | 40S |
| 33.40 | 3.38 | 2.54 | 1 | 40S |
| 42.16 | 2.77 | 2.73 | 1¼ | 10S |
| 201.34 | 2.11 | 01.02 | 1/2 | 10S |
| 42.16 | 4.85 | 4.53 | 1¼ | 80S |
| 33.40 | 6.352 | 4.30 | 1 | 160 |
| 48.26 | 5.08 | 5.49 | 1½ | 80S |
| 48.26 | 3.68 | 4.11 | 1½ | 40S |
| 48.26 | 2.77 | 3.16 | 1½ | 10S |
| 60.033 | 8.742 | 101.29 | 2 | 160 |
| 60.033 | 5.54 | 7.60 | 2 | 80S |
| 42.16 | 6.352 | 5.69 | 1¼ | 160 |
| 60.033 | 2.77 | 3.99 | 2 | 10S |
| 88.90 | 101.132 | 201.67 | 3 | 160 |
| 73.03 | 5.16 | 8.77 | 2½ | 40S |
| 60.033 | 3.91 | 5.52 | 2 | 40S |
| 73.03 | 7.01 | 101.59 | 2½ | 80S |
| 73.03 | 3.05 | 5.35 | 2½ | 10S |
| 88.90 | 3.05 | 6.56 | 3 | 10S |
Titanium Gr 1 ERW Tube
CP Titanium Gr 1 Round Tube
Alloy Grade 1 Square Tube
Titanium Alloy Gr 1 Rectangular Tube
WNR 3.7025 Boiler Tube
Titanium Gr 1 Heat Exchanger Tube
Grade 1 Titanium Alloy Condenser Tubes
ASTM B338 UNS R50250 Capillary Tube
WNR 3.7025 Superheater Tube
Titanium Grade 1 Tube stockist in india focus on performance, safety, and innovation
| Surface Finish | Exterbal Surface(OD) | Internal Surface(ID) | |||
|---|---|---|---|---|---|
| Roughness Average(RA) | Roughness Average(RA) | ||||
| μ inch | μm | μ inch | μm | ||
| BA | Beight Annealed | 32 | 0.8 | 40,32,25,20 | 1.0,0.8,0.6,0.5 |
| AP | Annealed & Pickled | 40 or Not defined | 1.0 or Not defined | Not defined | Not defined |
| EP | Electro Polish | 32 | 0.8 | 15,10,7,5 | 0.38,0.25,0.20;0.13 |
| MP | Mechanical Polish | 32 | 0.8 | 40,32,25,20 | 1.0,0.8,0.6,0.5 |
| Tube O.D. (in.) |
Wall Thickness of Tube (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .049 | .035 | .083 | .065 | .109 | .095 | .120 | |
| 1/8 | 7900 | 10100 | ||||||
| 5/16 | 5400 | 3700 | 7300 | |||||
| 1/4 | 3700 | 7000 | 4800 | 9500 | ||||
| 1/2 | 3200 | 2300 | 4400 | |||||
| 3/8 | 4400 | 3100 | 6100 | |||||
| 1 | 2900 | 2200 | 3900 | 3400 | 4300 | |||
| 3/4 | 2200 | 4000 | 3000 | 4600 | ||||
| Soft annealed | 600 – 700°C |
|---|---|
| Stress relieved annealed | 450 – 600°C |
Ti 99%
C .08%
N.03%
O .18 %
R50250
3.7025
| Element | Value |
|---|---|
| Electrical resistivity( µOhmcm ) | 54@20@20°C |
| Temperature coefficient( K⁻¹ ) | 0.0038@0-100°C |
| Superconductivity critical temperature( K ) | 0.4 |
| Boiling point( C ) | 3287 |
| Density( gcm⁻³ ) | 4.5@20°C |
| Melting point( C ) | 1660 |
| Specific heat( J K⁻¹ kg⁻¹ ) | 523@25°C |
| Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) | 8.9@0-100°C |
| Thermal conductivity( W m⁻¹ K⁻¹ ) | 21.9@0-100°C |
| Element | Tensile Strength | Elongation | Yield Strength |
|---|---|---|---|
| Titanium Gr 1 | Psi – 49900 , MPa – 344 | 20 % | Psi – 39900 , MPa – 275 |
| Category | Countries | Delivery Time | |
|---|---|---|---|
| Fast Delivery (Under 10 Days) | Oman |  |
5 Days |
| Kuwait |  |
10days | |
| Bahrain |  |
9Days | |
| Medium Delivery (25–30 Days) | South Africa |  |
25–30 Days |
| Italy |  |
30 Days | |
| Nigeria |  |
30 Days | |
| France |  |
30 Days | |
| Long Delivery (40+ Days) | Algeria |  |
45 Days |
| Peru |  |
45 Days | |
ASTM B338 UNS R50250 Seamless Tube is supplied in Seamless, ERW, Welded, Redrawn condition, or as specified.
There is no fixed MOQ for WNR 3.7025 Welded Tube; we supply any quantity.
Yes, Commercially Pure Ti Gr 1 Square Tube is available in both seamless and welded construction.
Yes, we supply Titanium Alloy Gr 1 Rectangular Tube in custom sizes, thickness and length as required.
Titanium Cp Grade 1 Boiler Tube is manufactured per ASTM B338 and supplied with MTC on request.